U.S. specifications
- Voltage
- 110–120V / 60Hz
- Light source / bulb base
- Integrated LED
- Light source included
- Yes — integrated LED module included
- Color temperature
- 3000K Warm White
- Brightness
- Model A ∅ 28″ x H 11.8″: 2,400 lm; Model B ∅ 28″ x H 11.8″: 2,400 lm; Model C ∅ 42″ x H 11.8″: 3,000 lm; Model D ∅ 42″ x H 11.8″: 3,000 lm; Model E ∅ 42″ x H 11.8″: 3,000 lm
- Control
- Handheld remote included; standard wall switch is master power only
- Fan speeds
- 3 speeds — Low / Medium / High
- Nominal airflow by speed
- 28 in: Low 1,300 CFM; Medium 2,200 CFM; High 3,200 CFM; 42 in: Low 1,900 CFM; Medium 3,300 CFM; High 4,800 CFM
- Physical mounting
- Ceiling-mounted fan fixture
- Electrical connection
- Hardwired
- Location
- IP20
Brightness is the nominal catalog specification for the lighting module at the selected size. Size, finish and other available choices remain as listed in the selector.
Fan performance and control
- Blade span / overall diameter
- 28 / 42 in — select by variant
- Motor
- DC variable-frequency motor
- Fan speeds
- 3 speeds — Low / Medium / High
- Control
- Handheld remote included; standard wall switch is master power only
- Reverse mode
- Yes — reversible direction controlled by the included remote
- Nominal airflow by speed
- 28 in: Low 1,300 CFM; Medium 2,200 CFM; High 3,200 CFM; 42 in: Low 1,900 CFM; Medium 3,300 CFM; High 4,800 CFM
- Noise rating
- No numerical laboratory dB rating is currently published
- Installation support
- Hardwired; fan-rated junction box and suitable structural support required
- Sloped ceiling
- Confirm a compatible downrod or slope adapter before ordering for an angled ceiling
Fan motor watts describe electrical input, not airflow and not lighting brightness. Use the lumen value in the lighting specification to compare brightness. The included remote is the normal operating control; a standard in-wall switch should be used only to provide or disconnect master power.
Nominal airflow values are size-based Breeze & Beam catalog specifications for comparison. They are not represented as DOE laboratory certification data unless model-specific test documentation is shown.
The design idea
Aeroluxe Modern Ceiling Fan Light is selected for the way its combined light-and-airflow form reads from below. In bedroom, home office, and living room, the wooden palette supports a natural & japandi and modern minimal rather than overly ornamental direction.
Aeroluxe Modern Ceiling Fan Light brings its natural & japandi and modern minimal profile to bedroom, home office, and living room. Review the ceiling plan at full scale, especially where beams, sloped surfaces, or off-center electrical boxes affect placement.
Current specification record
- Product type
- Ceiling Fan Light
- Materials
- Wooden
- Dimensions
- ∅ 28″ x H 11.8″; Model A ∅ 28″ x H 11.8″; Dia 70cm x H 30cm / ∅ 28″
- Finish and color
- Body Finishes: Walnut Wood, Nickel, Black; Lampshade Finishes: White; 3000K Warm White
- Light color
- 3000K Warm White
- Mounting
- Ceiling-mounted fan fixture
- Power source
- Hardwired
- Location rating
- IP20
- U.S. electrical preparation
- 110–120V / 60Hz
Configuration checklist
The recorded dimensions for Aeroluxe Modern Ceiling Fan Light are ∅ 28″ x H 11.8″; Model A ∅ 28″ x H 11.8″; Dia 70cm x H 30cm / ∅ 28″. The catalog currently contains 5 purchasable configurations. Available selection data is Size: Model A ∅ 28″ x H 11.8″; color temperature: 3000K Warm White; brightness: see the selected-size specification above; control: Handheld remote included; standard wall switch is master power only. Do not select wiring accessories or controls until the exact product variant and installation site have been reviewed.
Made for the fifth wall
Breeze & Beam brings a two-decade Zhongshan manufacturing perspective to ceiling lighting. Aeroluxe Modern Ceiling Fan Light reflects that perspective through wooden, a fan profile body, and a clearly defined combined light-and-airflow form.
What’s included
- Fixture body and all shades or diffusers shown for the selected configuration
- Integrated LED module matched to the stated default lumen output
- Ceiling mounting hardware
- Receiver and handheld remote control
- Installation instructions
The in-wall switch, junction box and site wiring are supplied by the installation site. The integrated LED module is not a standard user-replaceable bulb; service should be performed by a qualified technician.