U.S. specifications
- Voltage
- 110–120V / 60Hz
- Light source / bulb base
- Light-equipped variants: E26 replaceable LED bulb; variants labeled Without Light: no light kit
- Light source included
- Light-equipped variants: Yes — complete light-source set included; variants labeled Without Light: No
- Color temperature
- 3000K Warm White
- Brightness
- ∅ 42″ X H 11.8″: 3,000 lm; ∅ 48″ X H 11.8″: 3,600 lm; ∅ 52″ X H 11.8″: 3,600 lm
- Control
- Handheld remote included; standard wall switch is master power only
- Fan speeds
- 3 speeds — Low / Medium / High
- Nominal airflow by speed
- 42 in: Low 1,900 CFM; Medium 3,300 CFM; High 4,800 CFM; 48 / 52 in: Low 2,200 CFM; Medium 3,800 CFM; High 5,500 CFM
- Physical mounting
- Ceiling-mounted fan fixture
- Electrical connection
- Hardwired
- Location
- IP20
Brightness is the nominal catalog specification for the lighting module at the selected size. Size, finish and other available choices remain as listed in the selector.
Fan performance and control
- Blade span / overall diameter
- 42 / 48 / 52 in — select by variant
- Motor
- DC variable-frequency motor
- Fan speeds
- 3 speeds — Low / Medium / High
- Control
- Handheld remote included; standard wall switch is master power only
- Reverse mode
- Yes — reversible direction controlled by the included remote
- Nominal airflow by speed
- 42 in: Low 1,900 CFM; Medium 3,300 CFM; High 4,800 CFM; 48 / 52 in: Low 2,200 CFM; Medium 3,800 CFM; High 5,500 CFM
- Noise rating
- No numerical laboratory dB rating is currently published
- Installation support
- Hardwired; fan-rated junction box and suitable structural support required
- Sloped ceiling
- Confirm a compatible downrod or slope adapter before ordering for an angled ceiling
Fan motor watts describe electrical input, not airflow and not lighting brightness. Use the lumen value in the lighting specification to compare brightness. The included remote is the normal operating control; a standard in-wall switch should be used only to provide or disconnect master power.
Nominal airflow values are size-based Breeze & Beam catalog specifications for comparison. They are not represented as DOE laboratory certification data unless model-specific test documentation is shown.
Design and room fit
Banana Wood Leaves Ceiling Fan Light approaches the ceiling as part of the room architecture, using wood-led material expression and metal, wood, glass, copper to create a natural & japandi focal point without relying on surface decoration alone.
Banana Wood Leaves Ceiling Fan Light brings its natural & japandi profile to living room. Review the ceiling plan at full scale, especially where beams, sloped surfaces, or off-center electrical boxes affect placement.
Verified product data
- Product type
- Ceiling Fan Light
- Materials
- Metal, Wood, glass, copper
- Dimensions
- ∅ 42″ X H 11.8″; ∅ 48″ X H 11.8″; ∅ 52″ X H 11.8″
- Finish and color
- Finishes: Walnut Wood, Black; Model A Walnut Wood Grain & Black (Without Light); Model B Walnut Wood Grain & Black
- Light color
- 3000K Warm White
- Mounting
- Ceiling-mounted fan fixture
- Power source
- Hardwired
- Bulb base
- Light-equipped variants: E26 replaceable LED bulb; variants labeled Without Light: Not applicable
- Location rating
- IP20
- U.S. electrical preparation
- 110–120V / 60Hz
Sizes and selectable options
The recorded dimensions for Banana Wood Leaves Ceiling Fan Light are ∅ 42″ X H 11.8″; ∅ 48″ X H 11.8″; ∅ 52″ X H 11.8″. The catalog currently contains 9 purchasable configurations. Available selection data is Size: ∅ 42″ X H 11.8″; Color: Model A Walnut Wood Grain & Black (Without Light). Match every option on the same variant line before ordering; images may show more than one configuration.
- Size: ∅ 42″ X H 11.8″
- Color: Model A Walnut Wood Grain & Black (Without Light)
The gallery contains 18 product images. Use images to understand form and finish, but use the written dimensions and selected option values for ordering.
U.S. electrical planning
Plan Banana Wood Leaves Ceiling Fan Light around a 110–120V / 60Hz U.S. supply. The standard U.S. configuration uses Ceiling-mounted fan fixture and a hardwired electrical connection; lighting details include light source: E26 replaceable LED bulb; color temperature: 3000K Warm White; brightness: see the selected-size specification above; control: Handheld remote included; standard wall switch is master power only. Before energizing the fixture, have a qualified installer check grounding, conductor connections, mounting support, and applicable local rules.
Factory perspective
Breeze & Beam draws on 20 years of lighting manufacturing in Zhongshan. Banana Wood Leaves Ceiling Fan Light enters the collection because its wood-led material expression turns metal, wood, glass, copper into a recognizable room-scale ceiling feature.
What’s included
- Important: variants explicitly labeled “Without Light” do not include a light kit or bulbs; all other light-equipped variants include the complete stated light-source set.
- Fixture body and all shades or diffusers shown for the selected configuration
- A complete set of E26 LED bulbs matched to the selected configuration
- Ceiling mounting hardware
- Receiver and handheld remote control
- Installation instructions
The in-wall switch, junction box and site wiring are supplied by the installation site. Use a qualified installer and follow the wattage marking on each socket when replacing a bulb.